Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Asheboro, NC
We provide independent Gelco service across Asheboro, NC, and the one thing that makes our Gelco work here different is the flue beneath the cap. Asheboro fireplaces have burned real wood hard, and that loads the cap screens, damper hardware and flue with soot and creosote in a way decorative gas-log setups never do. We clean the chimney, then service the Gelco cap and damper to match. Our technicians have up to 14 years of experience, and we’re an independent shop, not affiliated with Gelco. To book a sweep or get a free estimate, call (877) 798-3391.
Why Asheboro Residents Choose Us for Gelco Service
Gelco makes chimney caps, dampers and component hardware, and we handle all of it as part of a normal chimney visit. That independence matters. We aren’t tied to the manufacturer, so we can give you an honest read on whether your existing Gelco unit needs a new screen, a reseat with fresh screws, or full replacement. No script pushing a sale.
Asheboro’s housing pushes the work in specific directions. The older brick ranches and mill-era homes around downtown have exterior chimneys that have taken decades of weather, and their Gelco caps show it: legs that loosen, flanges that rust, screens that close up. We know those failure patterns because we see them across Asheboro. We use quality parts that fit the equipment, not generic substitutes, and we schedule around your day. Call (877) 798-3391 to set up a visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Asheboro
Here are the Gelco issues that come up most in Asheboro, and why they show up here more than in a lot of places:
- Cap screens and louvers corroding shut. Asheboro’s year-round humidity works on the steel in a cap screen, and the soot from real wood burning accelerates the clog. When the screen closes up, draft chokes and smoke pushes back into the room on a cold start.
- Top-mount damper seals stiffening or rusting. After humid summers, the seal on a Gelco top-mount damper stops seating. The flue then leaks conditioned air all winter and summer. A damper that no longer seals is doing its opposite job.
- Cap legs and mounting flanges loosening on exterior brick. An Asheboro exterior brick chimney takes weather on all four sides. Legs that were snug twenty years ago work loose, and flanges rust through at the fastener points.
- Screen mesh torn by squirrels and birds. A torn screen lets nesting material drop straight onto the smoke shelf above the damper. That material sits against the flue opening and is a real fire risk.
- Glazed creosote loading the whole assembly. Flues behind original brick in older Asheboro ranches carry heavy creosote the cap screen can’t shed, so cap and damper calls here often turn into glaze-removal jobs.
Gelco Service in Asheboro: What Local Conditions Mean for Your Equipment
The single most useful thing to understand about an older Asheboro chimney is why there’s so much creosote behind the brick. During the 1970s energy crunch, a lot of 1950s-1970s mill-era and downtown homes used the fireplace as their primary heat source, and the flues behind that original brick carry the evidence: heavy, glazed creosote a standard brush-and-go sweep won’t touch. That same buildup coats the cap screens and damper hardware on those very chimneys. So a call that starts as “my Gelco cap screen is plugged” frequently becomes a glaze-removal job once we look down the flue. Asheboro’s cool damp winters and humid summers make it worse. Moisture in a seldom-used flue encourages creosote to glaze, and the original clay tile liners in these chimneys take on water year-round. If your Asheboro home has been heated by wood for decades, expect the cap and damper work to come with real flue cleaning, not just a screen brush.
Gelco Models & Products We Service in Asheboro
Gelco chimney products are simple hardware, and we service the full range: single-flue stainless rain caps, multi-flue chimney caps, top-mount damper assemblies, and chimney cap screens and spark arrestors. When a cap or damper needs work, we match the right component to what’s already on the chimney. For Gelco caps and dampers, a correct-fit quality replacement is often as good as OEM, so the honest call is usually replace rather than chase rare parts. Repair only makes sense when the existing unit is sound and just needs reseating, new screws or fresh screen. We make that call by inspecting the actual hardware. No inventory, no guesswork from a catalog.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Asheboro
Pricing depends on what we find, and we set it by written estimate before any work begins. A standard sweep is the base. If we’re pulling a clogged Gelco cap screen and reseating the damper, that adds labor. Glaze removal on a heavily creosoted flue is its own line. Replacing a cap or top-mount damper assembly is another. The free estimate covers us looking at the cap, the damper and the flue together, so you see what’s actually worn out and what can wait. Call (877) 798-3391 for an exact quote. Estimates are free.
Serving Asheboro, NC – Our Local Coverage Area
We serve Asheboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Asheboro
Asheboro’s humid summers and the soot from heavy wood burning combine to close up a cap screen faster than most homeowners expect. The corrosion roughens the mesh, soot clings, and the screen packs shut. We clear the screen and check the flue for the buildup feeding it.
No. Glazed, third-degree creosote is baked on and a standard brush won’t touch it. Original brick flues behind 1970s-era primary-heat fireplaces commonly carry this. It takes dedicated glaze removal, and we’ll tell you honestly when it does.
Sometimes. A damper with a sound body but a stiff or slightly corroded seal can often be reseated and re-fastened. If the seal assembly is rusted through, replacement fits better. We inspect before recommending either.
No, it’s a different job. Freestanding wood stoves on the rural 27205 fringe run metal chimney pipe, which gets a different sweep and a separate cap and venting check than a clay-tile masonry flue. We service both.
Usually yes, with a re-check of the legs and flanges. An exterior brick chimney takes weather on all sides, and a Gelco cap keeps water out of the flue. If the legs are still sound, a reseat and fresh screen will serve you. Call (877) 798-3391 for an estimate.
Service Areas Near Asheboro
We serve Gelco customers across Asheboro and the surrounding communities, including Franklinville, High Point, McLeansville, Walnut Cove and Advance. If you’re in one of those towns and your Gelco cap or damper needs service, call (877) 798-3391.
Book Your Gelco Service in Asheboro Today
If your Gelco cap screen is clogged or your damper won’t seal, we can take a look and give you a straight answer on repair versus replace. Call (877) 798-3391 for a free estimate in Asheboro. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep High Point.